Fabrication
Sheet and pipe that have to stay in series
Workshops cutting 304 or 316 for equipment. Form and thickness sit beside the grade, not after the deal.
Stainless steel · Series before slogan
A family page for buyers who know that magnetism, molybdenum and the wrong 300-series mix are not small talk.
Overview
Buyers come here because “stainless” is too wide. Bharani supplies industrial metal scrap across India; on this family we start with 200-series, 304, 316, 400-series or super duplex, then form.
Eight years selling metal scrap has a simple stainless rule: seller nicknames are a starting point, not a certificate. Where it is appropriate, inspection or PMI can be part of the talk. It is not a default theatre for every lot.
We don’t buy scrap from the public. This page is for industrial stainless buyers. Contact Bharani once you can name a series — or say you cannot, and we will ask better questions.
Grade board
Five Tier-1 doors. Cards route to contact with family and grade tagged until dedicated grade URLs exist.

Manganese-bearing series that gets mislabelled more often than people admit. Name 201/202 if you can; if you cannot, say so.
Explore
The stainless most shops think they mean. We still ask form — sheet vs turning vs pipe — before treating it as settled.
Explore
Molybdenum is the point. If the requirement is 316 / 316L, say it. “Marine stainless” is not a grade.
Explore
Ferritic / martensitic conversations — 410, 430 and neighbours. Magnetism is a clue, not a full ID.
Explore
Named duplex / super duplex lots, discussed as such. Small family, high cost of being wrong — conversation first.
ExploreForms available
These are the words we expect in a useful first note. If your lot sits between two, say both.
Who buys this family
Fabrication
Workshops cutting 304 or 316 for equipment. Form and thickness sit beside the grade, not after the deal.
Process plant
Chemical and pharma-adjacent buyers who will notice molybdenum missing. Inspection talk belongs here when the lot warrants it.
Melt / processor
People melting stainless who need the series named, not “SS mix.” Quantity and location come right after.
Duplex users
Super duplex is not a catalogue filler. If that is the requirement, say so on contact and skip the rest of the menu.
A practical conversation
This is how we keep the thread short: material, then form/grade, then quantity and location, then timing.
The family and, if you have it, the grade name you actually buy.
Sheet is not turning. 304 is not 316. Say both if you can.
How much, and where it needs to land. No fake MT on the page.
When you need it. Availability is confirmed case by case.
Family questions
Tier-1 doors on this page: 200-series, 304, 316, 400-series and super duplex. Other neighbours can be discussed once the series is in view. Availability is case by case.
Yes, where it is appropriate for the lot and the buyer’s spec. It is not a sticker we put on every stainless enquiry. Raise it when you write in.
No. They are separate grade cards for a reason. If you are unsure, tell us the application and the form — we will not flatten them into “stainless.”
No. Sell-side only. We don’t buy scrap from the public.
Next step
Share grade, form, quantity, location and timing. Stainless supply for industrial buyers across India — not a public scrap desk.